Chassis flex

Home Forums SP250 Owners’ Club Forum Chassis flex

This topic contains 0 replies, has 1 voice, and was last updated by  John Keatley 2 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #728

    John Keatley
    Participant

    Can anyone tell me if I can stiffen the car so that the doors don’t tighten on closing. Can this be done by welding hot metal straps to the bottom of the chassis to stop it sagging.
    It is a minor problem but it is annoying.

    #730

    lauriej1s
    Participant

    If an “A” spec where you are having those problems., then to fix on a permanent/long term basis and stiffen the chassis it requires the body to be lifted and the various supplementary (B/C) chassis stiffening added.

    Otherwise, if a “B/C” and the body has been off, it’s an aligning of the body backing pieces between the body and chassis at the “B” post area and backwards. These may have settled since a recent body off restoration.

    Laurence

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.